Superior lubrication specifically designed to eliminate squeaks and groans associated with suspension systems.
Stop Squeak is a silicone based lubricant with elastomer rejuvenating additives as well as PTFE solids for load carrying and lasting friction reduction. Rejuvenates hardened and noisy bushings as well as reduces friction between load carrying parts and has excellent water resistant properties
Activated foam de-carbons hard to reach engine parts restoring performance and functionality by dissolving carbon, gum, lacquer, tar and varnish deposits. Applications include EGR Valve, Turbo Compressor, Intake Manifold and Valves, “Off-vehicle” DPF and Parts
Repairs cracks in cylinder blocks in 30 min without dismantling.
Repairs cracks and leaks in head gaskets (metal only).
High Pressure and vibration resistant.
Over time deposits form on you Catalytic converter and oxygen sensor rendering your vehicle’s performance lower than it should be. Wynn’s Catalytic converter and Oxygen sensor cleaner optimizes the efficiency of the catalytic converter and Oxygen sensors by removing harmful deposits and restoring your vehicle’s performance.
Your bike or outboard motor’s performance is dependent on the cleanliness of the fuel delivery system. Wynn’s Bike & outboard tune-up was specifically developed for ease of use, to ensure thorough cleaning of your motor’s important components without the requirement of dismantling. Wynn’s Bike & outboard tune-up blend has been proven to be the premium product in the market to restore your motor’s performance.
Diesel injector & Turbo cleaner is specially formulated to
dissolve and remove gums, resins and high temperature
carbon deposits from injectors as well as reduce the
temperature of soot incineration through Cerium
Technology, removing all deposits on the exhaust side of
the Turbo, restoring optimal performance and fuel economy.
Wynn’s DRY FUEL is a product suitable for petrol or diesel engines developed to absorb water from the fuel system.
Fuel is hygroscopic by nature meaning it attracts water from the atmosphere causing corrosion, micro-organism growth and poor engine operation.
Dry Fuel emulsifies the free water into a stable fuel solution allowing it to be burned through combustion and out the exhaust as vapour without damage to the engine.
Many new cars are fitted with emission controlling devices such as an Exhaust Gas Re-circulation (EGR) system and a Diesel Particulate Filter or DPF.
This devise will capture up to 100% of soot particles from the exhaust, then regenerates through high temperature burning of these particles.
With today’s stop start driving, the DPF does not always have time to regenerate causing clogging and ultimately replacement.
By adding Wynn’s Clean Burn, a severely clogged DPF will regenerate in minutes restoring power. Similarly, the exhaust turbo fan accumulates large amounts of soot and un-burned carbon deposits which will be burnt off through this process.
Wynn’s Clean Burn uses unique catalytic technology added to the fuel, to lower the incineration temperature of soot particles to below 400 degrees C, maintaining a clean, trouble free DPF system, clear EGR valve to restore correct air/fuel mixture and clean both conventional and variable vane turbo fans providing immediate turbo response and optimum performance.
Designed to dissolve high temperature petrol deposits on the injector pintle, keeping injectors clean and lubricated.
Removes water from the fuel system, restores efficient fuel delivery and is safe to use with all fuel system components including high pressure direct injection, catalytic converters and O2/ lambda sensors.
Wynn's Enviropurge is an independently operated apparatus which effectively and professionally cleans petrol and diesel injection systems without disassembly while the engine is running.
The specially formulated cleaning fluids remove carbon and soot deposits in the combustion camber, frees sticky rings as well as removes internal injector deposits restoring efficient fuel delivery.
Diesel Treatment is the complete Diesel additive to maintain
best performance in all conditions.
Cleans Injectors, reduces soot emissions and keeps EGR and
DPF systems clean with Cerium Technology, Biocide kills
algae and micro-organisms, flow improver prevents diesel
waxing to well below freezing point. Added lubricity extends
injector life and lubricates fuel pump. Assists with water
separation by demulsifying the fuel and water for easy and
complete removal through the water trap.
An emission free, environmentally friendly, lead substitute solution to protect the older vehicle when running on unleaded petrol.
Valve Guard will prevent valve seat recession, free sticky valves and lubricate the upper cylinder improving general performance.
Valve Guard is compatible with normally aspirated as well as turbo charged vehicles and will not affect catalytic converters.
200ml treats 50 litres unleaded petrol.
Wynn's Diesel Power Boost is a Cetane improving formulation which raises the Cetane number of diesel reducing ignition delay resulting in more complete and consistent diesel combustion.
Meets all NCWM, EMA, and TMC definitions for Premium Diesel as per (ASTM D613)
-Early and continuous ignition of diesel delivers better combustion throughout the power stroke delivering greater torque and power.
-Vastly improves cold starting and low temperature performance
-Quietens diesel engine noise by reducing knock
-More complete combustion leads to better fuel economy and reduced emissions.
Wynn’s Misfueling Engine Protector, protects an engine in the event of petrol mistakenly pumped into a diesel fuel tank.
If you misfuel or put the wrong fuel into your fuel tank, there are some specific problems that you must be aware of.
Adding Petrol into a Diesel engine can have catastrophic repercussions which could result in major damage to engine parts.
Wynn’s Misfueling Engine Protector treats up to 10% of incorrect fuel contamination.
Follow instructions carefully.
Wynn's Injection System Purge is a cleaning product to unclog dirt, varnish and carbon in fuel injectors and combustion chamber of vehicles.
It has to be used with the Wynn’s Enviropurge.
Wynn's Diesel System Purge is a cleaning product to eliminate dirt and deposits in diesel injection systems.
It has to be used with the Wynn’sEnviropurge equipment.
Cleans the entire diesel fuel system without dismantling.
Restores the injector spray pattern and improves combustion.
Wynn’s Carb Cleaner is a powerful solvent which enables you to clean the carburettors without dismantling.
Simply spray it into the float chamber vent to clean the inside and down the throat for rapid results.
Spray onto the outside to clean the exterior.
Wynn’s Throttle Body and Air Intake Cleaner will remove sticky residue, caused by oil mist and crankcase fumes, from air intake system components as well as fuel residues, gums and resins.
These tar like deposits build up on the idle speed control and butterfly valves leading to irregular airflow and erratic idling.
Formulated for modern petrol and diesel vehicles, will not remove protective surface coatings and is O2/ Lambda sensor safe
Wynn’s Brake & Parts Cleaner instantly removes brake residues and deposits such as brake fluid, oil, grease and brake dust without polluting the environment. Use before every brake service to ensure clean re-application of callipers and pads. The strong solvent action is also ideal for cleaning parts as well as CV joints before new grease is applied.
Wynn’s Engine Start is the easy solution to starting problems.
Avoids wear of the starter motor and prevents battery drain.
Engine start assists with cold weather starting, flooded engines and helps restore fuel pump pressure after a vehicle has run dry.
Unlike many starting fluids, Wynn’s Engine Start can be used in 4 stroke and 2 stroke engines as it contains a friction proofing lubricant.
.
Wynn’s Bright Spark is an intelligent electrical circuit and contact cleaner.
Spray directly onto surfaces to be cleaned to restore good electrical contact. It will remove all dirt, flux and oily residue as well as remove moisture.
Ideal for sensitive electronics, printed circuits, switches and electrical panels.
Safe to use on most plastics, rubber and metal.
Wynn’s Tyre Fix is a great emergency product which will re-inflate and seal a puncture without having to jack up the vehicle or remove the wheel.
Simply follow the easy instructions to connect the product, inflate and seal the puncture.
Ideal for all vehicles, bikes, boat trailers, caravans and 4X4’s.
Wynn’s Fuel Stabiliser is a petrol & diesel fuel additive to
prevent fuel from degrading when a vehicle is not in use
for extended periods of time, or when stored.
Ideal for recreational vehicles, generators, mowers, boats,
bikes, emergency equipment classic and hybrid cars, etc
Diesel injector & Turbo cleaner is specially formulated to
dissolve and remove gums, resins and high temperature
carbon deposits from injectors as well as reduce the
temperature of soot incineration through Cerium
Technology, removing all deposits on the exhaust side of
the Turbo, restoring optimal performance and fuel economy.
Diesel Treatment is the complete Diesel additive to maintain
best performance in all conditions.
Cleans Injectors, reduces soot emissions and keeps EGR and
DPF systems clean with Cerium Technology, Biocide kills
algae and micro-organisms, flow improver prevents diesel
waxing to well below freezing point. Added lubricity extends
injector life and lubricates fuel pump. Assists with water
separation by demulsifying the fuel and water for easy and
complete removal through the water trap.
Power Boost is a catalytic converter safe, octane enhancing additive
for high performance petrol engines with knock sensor technology.
The increased octane provides more power than would be delivered using standard fuel.
Wynn's battery water is the purest and most effective medium for efficient electron transfer in lead batteries, it has been distilled and de-mineralised by reverse osmosis to promotes extended battery life.
A complex blend of selected cleaning agents formulated
to accumulatively clean the entire petrol fuel system
removing all lacquer, gum and resin deposits associated
with petrol engines.
Wynn’s Fuel System Cleaner is ideal for carburettor, multipoint/
indirect injection or inlet induction systems where
the air/fuel mixture leaves gum and resin deposits in the
inlet manifold.
Use as directed to maintain efficient fuel delivery or decant
into a container to clean engine parts.
Safe to use with catalytic converters as well as O2/lambda sensors.
Promotes complete petrol combustion while cleaning
carbon deposits from the upper cylinder preventing preignition
and engine run-on. Ideal to use in engines which
are not run regularly to avoid fuel deposits and carbon
build up caused by contamination and adverse effects of
fuel degradation.
Wynn’s Exhaust Sealant provides an easy, permanent and gas tight seal of small to medium sized holes in the exhaust.
The heat of the exhaust hardens the sealant to form a solid permanent fix.
Wynn’s Hammer Forged Exhaust Sealant moulds easily around exhaust joints to form a perfect seal.
It is heat and vibration resistant and assists fitment by lubricating the flange before setting.
Wynn’s Grinding Paste is water based abrasive paste solution for asperity removal from metal surfaces.
It is a dual package containing fine and coarse grit for professional results.
Can be used to seat new valves, sharpen blades, remove score marks, lapping, tool making etc.
