Restoring effective heat transfer and maintaining the correct operating temperature is essential to the longevity and efficient running of an engine.
Wynn’s Radiator Flush will remove scale, rust and silicate fallout which restricts cooling.
It will also remove oil ingress caused by cylinder head gasket or oil cooler failure and is compatible with all coolant types,conventional EG as well as organic coolants. Aluminium and rubber hose safe.
• Dissolves and loosens scale and rust build-up from radiator and cooling jacket
• Restores heat transfer to effect correct operating temperature
• Removes oil ingress from head gasket or oil cooler damage
Shake bottle well
Add flush to cool radiator
Turn the interior car heater on full
Bring the car to operating temperature at fast idle
Continue for at least 10 minutes or drive for up to 20km
Drain and flush with clean water
Refill with deminerailused water and Wynn's Anti-freeze at the recommended ratio.
12 x 375ml
Cooling System
Cooling system problems, such as leaks and insufficient cooling due to fouling of the system, are the primary cause of vehicle breakdowns. To prevent these problems Wynn’s recommends radiator treatments.
Cooling System
Wynn’s Extended Life Coolant is a premium ready to use (Type D) Organic Acid Technology Coolant and Antifreeze which provides superior protection for modern vehicles.
Freezing Point -25℃ (ASTM D1177)
Specification meets with the below manufactures:
VW TL 774 D (G-12);RVI/RNUR 41-01-001 D Type;
FORD WSS- M97B44-D; VOLVO 260︔ MERCEDES DC 325.3;
MAN 324 SNF; MTU; PSA
Chilly Willy is a pre-mixed high performance inorganic coolant /antifreeze package for old and modern vehicles.
Made from the finest Euro spec glycols, anti-corrosion and anti-foam agents to provide superior protection.
Contains 40% MEG
Freezing Point: -25 degrees C (ASTM D1177)
ASTM D3306/D4985; SAE J-1034; British & Fed. Standards.
Wynn’s Coolant/ Antifreeze is a concentrate designed to meet old and modern vehicle requirements made from the finest Euro spec glycols, anti-corrosion and anti-foam agents to provide superior protection.
Freezing Point at 40% dilution -25 degrees C (ASTM D1177)
Wynn’s Coolant/Antifreeze meets ASTM D3306/D4985;
SAE J-1034; British & Fed. Standards.
Wynn’s Radiator Stop Leak is a unique blend of non-ferrous fibres and surface active agents which combine to plug hairline cracks and pinholes
associated with cavitation pitting and corrosion.
It will not cause any blockage of the radiator core or cooling matrix, nor will it harm any cooling system components.
Radiator Stop Leak is compatible with all Ethylene Glycol and OAT coolants as well as Aluminium and rubber hose safe.
It is recommended that Wynn’s Radiator Stop Leak is carried in recovery vehicles as an essential emergency repair item.
