Wynn’s ATF and Power Steering Flush has been scientifically formulated to provide complete flushing and cleaning of automatic gearboxes and ATF type power steering systems.
Over time deposits form on you Catalytic converter and oxygen sensor rendering your vehicle’s performance lower than it should be. Wynn’s Catalytic converter and Oxygen sensor cleaner optimizes the efficiency of the catalytic converter and Oxygen sensors by removing harmful deposits and restoring your vehicle’s performance.
Your bike or outboard motor’s performance is dependent on the cleanliness of the fuel delivery system. Wynn’s Bike & outboard tune-up was specifically developed for ease of use, to ensure thorough cleaning of your motor’s important components without the requirement of dismantling. Wynn’s Bike & outboard tune-up blend has been proven to be the premium product in the market to restore your motor’s performance.
Diesel injector & Turbo cleaner is specially formulated to
dissolve and remove gums, resins and high temperature
carbon deposits from injectors as well as reduce the
temperature of soot incineration through Cerium
Technology, removing all deposits on the exhaust side of
the Turbo, restoring optimal performance and fuel economy.
Many new cars are fitted with emission controlling devices such as an Exhaust Gas Re-circulation (EGR) system and a Diesel Particulate Filter or DPF.
This devise will capture up to 100% of soot particles from the exhaust, then regenerates through high temperature burning of these particles.
With today’s stop start driving, the DPF does not always have time to regenerate causing clogging and ultimately replacement.
By adding Wynn’s Clean Burn, a severely clogged DPF will regenerate in minutes restoring power. Similarly, the exhaust turbo fan accumulates large amounts of soot and un-burned carbon deposits which will be burnt off through this process.
Wynn’s Clean Burn uses unique catalytic technology added to the fuel, to lower the incineration temperature of soot particles to below 400 degrees C, maintaining a clean, trouble free DPF system, clear EGR valve to restore correct air/fuel mixture and clean both conventional and variable vane turbo fans providing immediate turbo response and optimum performance.
Designed to dissolve high temperature petrol deposits on the injector pintle, keeping injectors clean and lubricated.
Removes water from the fuel system, restores efficient fuel delivery and is safe to use with all fuel system components including high pressure direct injection, catalytic converters and O2/ lambda sensors.
Diesel Treatment is the complete Diesel additive to maintain
best performance in all conditions.
Cleans Injectors, reduces soot emissions and keeps EGR and
DPF systems clean with Cerium Technology, Biocide kills
algae and micro-organisms, flow improver prevents diesel
waxing to well below freezing point. Added lubricity extends
injector life and lubricates fuel pump. Assists with water
separation by demulsifying the fuel and water for easy and
complete removal through the water trap.
An emission free, environmentally friendly, lead substitute solution to protect the older vehicle when running on unleaded petrol.
Valve Guard will prevent valve seat recession, free sticky valves and lubricate the upper cylinder improving general performance.
Valve Guard is compatible with normally aspirated as well as turbo charged vehicles and will not affect catalytic converters.
200ml treats 50 litres unleaded petrol.
Wynn's Diesel Power Boost is a Cetane improving formulation which raises the Cetane number of diesel reducing ignition delay resulting in more complete and consistent diesel combustion.
Meets all NCWM, EMA, and TMC definitions for Premium Diesel as per (ASTM D613)
-Early and continuous ignition of diesel delivers better combustion throughout the power stroke delivering greater torque and power.
-Vastly improves cold starting and low temperature performance
-Quietens diesel engine noise by reducing knock
-More complete combustion leads to better fuel economy and reduced emissions.
Wynn’s Misfueling Engine Protector, protects an engine in the event of petrol mistakenly pumped into a diesel fuel tank.
If you misfuel or put the wrong fuel into your fuel tank, there are some specific problems that you must be aware of.
Adding Petrol into a Diesel engine can have catastrophic repercussions which could result in major damage to engine parts.
Wynn’s Misfueling Engine Protector treats up to 10% of incorrect fuel contamination.
Follow instructions carefully.
Wynn’s Fuel Stabiliser is a petrol & diesel fuel additive to
prevent fuel from degrading when a vehicle is not in use
for extended periods of time, or when stored.
Ideal for recreational vehicles, generators, mowers, boats,
bikes, emergency equipment classic and hybrid cars, etc
Diesel injector & Turbo cleaner is specially formulated to
dissolve and remove gums, resins and high temperature
carbon deposits from injectors as well as reduce the
temperature of soot incineration through Cerium
Technology, removing all deposits on the exhaust side of
the Turbo, restoring optimal performance and fuel economy.
Diesel Treatment is the complete Diesel additive to maintain
best performance in all conditions.
Cleans Injectors, reduces soot emissions and keeps EGR and
DPF systems clean with Cerium Technology, Biocide kills
algae and micro-organisms, flow improver prevents diesel
waxing to well below freezing point. Added lubricity extends
injector life and lubricates fuel pump. Assists with water
separation by demulsifying the fuel and water for easy and
complete removal through the water trap.
Power Boost is a catalytic converter safe, octane enhancing additive
for high performance petrol engines with knock sensor technology.
The increased octane provides more power than would be delivered using standard fuel.
A complex blend of selected cleaning agents formulated
to accumulatively clean the entire petrol fuel system
removing all lacquer, gum and resin deposits associated
with petrol engines.
Wynn’s Fuel System Cleaner is ideal for carburettor, multipoint/
indirect injection or inlet induction systems where
the air/fuel mixture leaves gum and resin deposits in the
inlet manifold.
Use as directed to maintain efficient fuel delivery or decant
into a container to clean engine parts.
Safe to use with catalytic converters as well as O2/lambda sensors.
Promotes complete petrol combustion while cleaning
carbon deposits from the upper cylinder preventing preignition
and engine run-on. Ideal to use in engines which
are not run regularly to avoid fuel deposits and carbon
build up caused by contamination and adverse effects of
fuel degradation.
